Tile Calculator
Choose the area shape, enter tile dimensions and grout joint, and get base tile count, order quantity with waste, and boxes needed.
गणना करें
गणना करें
इकाई बदलने पर मान फिर से गणना होते हैं
परिणाम
सूत्र
Project area is rectangle (L×W) or circle (π(d/2)²). Effective tile area includes grout joints: (tile length + joint) × (tile width + joint). Tile count = area ÷ effective tile area, then waste is applied.
हल उदाहरण
- Room 5 m × 3.6 m → area = 18 m²
- Tile 60 cm × 30 cm, grout 3 mm → effective tile area ≈ 0.1848 m²
- Base tiles ≈ 18 ÷ 0.1848 ≈ 97.4; with 10% waste → ceil(107.1) = 108
परिणाम: Order 108 tiles
How tile quantity is calculated
The calculator estimates tile quantity from geometric area coverage and includes grout spacing and waste for cuts and breakage.
Include grout joints for realistic coverage
Ignoring grout joints can overestimate tile count. The effective module includes tile size plus planned joint width.
Waste varies by layout complexity
Straight lay patterns usually need less waste than diagonal or herringbone patterns. Obstacles and many corners increase cuts.
Order by full boxes
Suppliers usually sell by box. The calculator rounds up to complete boxes based on your tiles-per-box value.
रोचक तथ्य
Tile calibration matters
Even tiles with nominally identical sizes can vary slightly by batch; check caliber before installation.
Larger tiles can reduce grout lines
Fewer joints can improve visual continuity, but flatness tolerances become more critical with large formats.
Diagonal layouts increase offcuts
45° patterns often need higher waste percentages because perimeter cuts are larger and more frequent.
Box labels may show nominal coverage
Manufacturer box coverage can differ from project reality when custom joint widths are used.
Extra stock helps future repairs
Keeping a few spare tiles from the same batch is useful for future replacements and avoids shade mismatch.
Substrate preparation affects consumption
Uneven substrates can change layout choices and cut quantities, increasing real material demand.
अक्सर पूछे जाने वाले प्रश्न
It depends on tile dimensions and grout joint width. This calculator computes exact coverage from your inputs.
Yes. Joints occupy area and affect the total tile count needed for full coverage.
Use about 5–8% for simple straight layouts and 10–15% for diagonal patterns, many corners, or small cut pieces.
Yes. Enter wall dimensions as the project area and keep the same logic for tile module and waste.
Tiles are purchased as whole pieces. The estimate rounds up after applying waste to avoid shortages.
Enter tiles per box and the calculator divides order quantity by that value, then rounds up to full boxes.
Yes. Subtract non-tiled zones for a tighter estimate, especially on wall installations.
Use it if sheet dimensions and joint assumptions match your product; otherwise use sheet coverage from the manufacturer.